
StudioBridge 10G PWR
SKU CONVNVIPR/SBB10X8P
Blackmagic StudioBridge 10G PWR combines eight 10G Ethernet SMPTE-2110 connections into a redundant pair of 100G Ethernet links. Each 10G port provides 90W PoE++ power for devices such as cameras and converters.
Available on backorder
Currently out of stock. We will confirm the delivery time after ordering.
- Posti parcel: delivery in 2–3 working days
- Free delivery in Finland for orders over €500
- Pickup from our store during opening hours
- Leasing with Nordea financing or GRENKE leasing
- At least 12 months' warranty on new equipment
Description
StudioBridge 10G PWR
The Blackmagic StudioBridge 10G PWR is designed to bridge low-cost single link 10G Ethernet SMPTE-2110 connections into high-end redundant 100G Ethernet based systems. It converts and combines 8 channels of 10G Ethernet into a redundant pair of 100G Ethernet connections. That means customers can plug in 8 separate 10G Ethernet Ultra HD devices. Each 10G Ethernet port has a massive 90W of PoE++ power, so customers can power equipment such as converters and cameras directly from their Ethernet connections.
Blackmagic 2110 IP products conform to the SMPTE-2110 standard, which specifies the transport, synchronization and description of 10-bit video, audio and ancillary data over managed IP broadcast networks. They can re-sync SDI inputs to a common PTP clock, or external gear can lock to the reference output generated from the PTP clock.
Features
- 100G 2110 IP Networks: 2 x 100G QSFP28 connections. Supports ST 2022-7 redundant delivery of IP streams over two 2110 networks.
- 10G 2110 IP Networks: 8 x 10G PoE++ RJ45 connections.
- Senders and Receivers per 100G Pair: 8 x Ultra HD or HD.
- 1G Control Network: 1 x RJ45 for NMOS control, configuration and software updates.
- SMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on each 2110 IP video stream over 100G and 10G Ethernet.
- SMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on each 2110 IP video stream over 100G and 10G Ethernet.
- Multi Rate Support: Auto detection of HD and Ultra HD.
- Computer Interface: 1 x USB-C for configuration and firmware updates.
- Power: 2 x IEC C14 power inputs.