Annuncicom MPI400 PoE Package
SKU 2021.9330P
Tilattavissa jälkitoimituksena
Ei tällä hetkellä varastossa. Vahvistamme toimitusajan tilauksen jälkeen.
- Posti Paketti: toimitus 2–3 arkipäivässä
- Yli 500 euron tilaukset toimitetaan Suomessa kuluitta
- Nouto myymälästä aukioloaikoina
- Leasing Nordean Tukirahoituksella tai GRENKE-leasingilla
- Uusille laitteille vähintään 12 kuukauden takuu
Kuvaus
Intercom / Paging device with contact closure inputs, relay outputs, Line and Mic / Speaker support
The Annuncicom MPI400 is a versatile Audio over IP device designed to serve as an end point or gateway between IP based intercom (VoIP/SIP or streaming) and traditional paging/intercom systems, microphone/speakers or an amplifier. The modern, robust & powerful hardware/software architecture provides a future proof platform that meets modern internet security requirements and can easily be adapted to individual customer needs. A wide variety of audio environments, such as Dante ®, SIP, InformaCast and Syn-Apps are supported. Codecs include PCM, AACplus, MP3, OPUS, G.711, G.722 that can be streamed using HTTP and RTP. Audio files can be stored on the internal memory and their playback can be triggered via a simple UDP command or scheduled. Thanks to the priority handler, the Annuncicom MPI400 can be configured to switch between sources according to one of the five priority settings and therefore eliminates the need for an audio matrix device.
Specs
CPU / Memory
- Barix IPAM400 Processor Module
- Quad-Core ARM CortexTM -A7
- 256 MB DDR3 SDRAM
- 16 MB SPI Flash
Operating System
- Embedded Linux based on Yocto
Power interface
- 24 VDC, +/- 20%, 12 Watt max.
on detach. screw terminal block - IEEE 802.3af PoE
Network interface
- 10/100Mbps auto-sensing
- RJ-45 connector with integrated Link /Activity LED
- IPv4/IPv6 capable
Protocols
- TCP/IP, HTTP, UDP, RTP, SIP, DHCP, Multicast capable
- Dante ® Support – Requires extra license
- Singlewire InformaCast compatibility – requires extra license
- SynApps Revolution compatibility
USB Interface
- 2x USB 2.0 type A interfaces
Discrete I/O
- 1x Normally open relay 30V 0.5A
- 1x Normally closed relay 30V 0.5A
- 2x digital dry contact inputs
Audio input interfaces
- Line level input +4dBu max, mono, unbalanced
- Microphone input, balanced, 18V phantom powered
- Microphone input, electret, unbalanced, 2.1V bias
Audio Output interfaces
- Audio output (mono), suitable to drive a speaker or a balanced output (exclusive output).Speaker: 1W @8ohms
Line out: symmetric/balanced,
non-isolated, with DC offset, 10dBu (unbalanced: 4dBu)volume level software controlled - 3.5mm headphone output
IP Audio formats
- FDX/HDX SIP client support
- HTTP(S) and (S)RTP Streaming
- Large variety of codecs can be supported (e.g. MP3, PCM, G.711, G.722, AAC+, OPUS)
User Interface
- Web interface for configuration
- 2 x Multicolor LED Status indicators
- Reset & Factory Defaults Button
Mechanical
- Aluminum case, 265 g
- Dimensions 108 x 38 x 78.7mm
(4.25 x 1.5 x 3.1 inch) rack and wall mountable using accessories
Warranty
- Two years
MTBF
- 115’800 hours
Annuncicom MPI400 replaces EOL products Annuncicom 100 and 200
Tekniset tiedot
| Valmistaja | Barix |
|---|---|
| SKU | 2021.9330P |
